60t/H Stainless Steel Desander Water Purification System Circulating Water System

• Customization: Available
• Type: Water Filtration System
• Usage: Environmental Protection, Chemical Industry
• Model NO.: JZXS-80
• Motive Force: Pressure
• Style: Tube
• Performance: Alkali
• Certification: CE
• Texture: Carbon Steel,Stainless Steel
• Peculiarity: Built-in Fine Mesh Strainer
• Way to Install: Not Complicated
• Result: Obvious
• Inlet Diameter: 50mm
• Outlet Diameter: 80mm
• Diameter of Sewage Outlet: 32mm
• Mertial: Stain Stainless
• Transport Package: Wooden Box Package
• Specification: 680cm*680cm*1200cm
• Trademark: JZY
• Origin: Hengshui, Hebei, China
• HS Code: 8421219090
• Production Capacity: 300 Units Per Month

Product Description

Product Description

 

Cyclone Desanding Equipment is made according to the principle of screening when the solid particles in the fluid rotate in the desander , which integrates the cyclone and filtration, and realizes Sand removal, turbidity reduction and solid-liquid separation in the field of water treatment.
Cyclone Desander uses the principle of centrifugal separation for sand removal.

   Specific Parameter

Sand Removal Diameter	> 0.1mm
Effluent Turbidity	≤10 degrees
Lnlet Pressure	≤0.25Mpa
Operating Temperature	room temperature

Work Principle

Work Principle
Work Process: Raw Water→Cyclone Desanding Equipment→Precision Filter→Impounding Reservoir→User
(Under certain ranges and conditions, the greater the water inlet pressure of the Desander , the higher the sand removal rate, and multiple sets can be used in parallel.)

First:Since the water inlet pipe is installed in the eccentric position of the barrel, when the water enters the equipment in an oblique tangential direction under a certain pressure, due to the different density of sand and water, the surrounding fluid is formed in the tangential direction around the barrel at first, resulting in strong rotational movement.
Second:When the water reaches a certain part of the cone, it turns to rotate upward along the axis of the cylinder, making the low-density water rise, and finally discharged through the outlet pipe.

 

Detailed Photos

Our Advantages

Our Advantages

1.Simple structure, easy operation, safe and reliable use, almost no maintenance.
2.Compared with the expansion pipe, buffer box and other sand removal equipment, it has the advantages of small volume, large processing capacity, saving site space and so on.
3.Can remove the sand in the water during the uninterrupted water supply process.
4.The secondary pollution of water quality in other ways of sand removal is avoided, and the sand removal efficiency is high.

Application Area
river water, well water sand removal, coal washing water, industrial beneficiation, solid-liquid separation, liquid degassing and non-miscible liquid separation. Can be used in air conditioning water treatment, chemical, petroleum, mining, medicine, textile and many other industry.

Installation Instructions

Installing Attention

1. The cyclone desander should be installed on the main channel of the water supply network and fixed on the base, and a bypass line should be added between the inlet and outlet pipes.
2. In order to ensure the smooth flow of water, a straight pipe of equal diameter with the water inlet should be installed before the water inlet of the equipment, and the length is equivalent to 10-15 times the diameter of the water inlet.
3. Adequate maintenance space should be reserved around the equipment during installation.
4. Normal operation, need to open the inlet and outlet valves, close the blowdown valve and bypass Valve:
5.According to the amount of sand content of the source water regularly discharge sand decontamination, open the sewage valve when sewage, until the outflow of water can be, sewage process does not affect the normal water use of the system.
6. Close the blowdown valve after blowdown.
7. If the sand discharge pressure is insufficient, the valve at the water outlet should be closed.
 

Product Parameters

Selection Suggestion
The selection of cyclone desander must consider the treated water quantity, the diameter of the external nozzle, the working pressure of the pipeline, the raw water quality and the water quality requirements after treatment. Under normal circumstances, when choosing a cyclone desander, on the premise of meeting the flow rate, it is preferred to choose a large model of equipment, and it is recommended to replace the large equipment with several devices in parallel in the system in order to achieve better solid-liquid separation effect.

Model	Treated water quantity	intake pressure	Sand removal rate	water inlet DN1	water outlet DN2	sewage draining exit DN3
Unit	m3/h	MPa	%	h	mm	mm
JzyXL-20	20	>0.2	>96	850	650	25
JzyXL-30	30	>0.2	>96	960	650	40
JzyXl-40	40	>0.2	>95	1150	1080	50
JzyXL-60	60	>0.25	>95	1150	1080	50
JzyXL-70	70	>0.25	>92	1580	1300	80
JzyXL-80	80	>0.25	>92	1580	1300	80
JzyXL-100	100	>0.3	>90	1760	1350	100
JzyXL-150	150	>0.3	>90	1760	1350	100
JzyXL-185	185	>0.3	>90	2000	1550	125
JzyXL-200	200	>0.3	>90	2334	1800	150
JzyXL-300	300	>0.3	>90	2457	1800	200

Company Profile

 Company Profile

Hengshui Hanna Trading Co.,LTD

Manufacturing Experience	20+ years
Treatment Solutions	120+
Factory Area	300+ Squares
Quality Rate	99%
Exported Countries	50+
Machine Output	8000+pieces/year

Factory Profile

1.Products are in stock, small orders can be shipped quickly.
2.No days off, guaranteed delivery on time.